wood plastic pelletizer machine

wood plastic pelletizer machine
1)parrallel twin screw extruder
2) vacuum exhaust system
3) capacity: 100-500kg/hour

 

  wood plastic pelletizer  machine.

 

Features

1.       this technology is suitable for produce WPC products at high value with variety of plastic and nature fiber, and the material is of 90% of waste plastic and waste nature fiber

2.       with scientific and reasonable technology, the machine has high efficiency and runs stable

3.       with both preperties of wood and plastic , the WPC products are of high stiffness and impact performance, the ratio of performance and price is much higher than wood and plastic

4.       the WPC products can be recycle 100%, so they are environmental products

Equipment advantages:

1.       the parallel twin screw extruder is used to mix the wood and plastic, and get good homogeneous melt

2.       it uses single screw extruder as the second stage to build the pressure to extrude the final products

3.       it adopts both advantages of single screw extruder and parallel twin screw extruder

4.       wood fiber can be 70% in the WPC products due to the good mixing effect, so the cost of WPC products is low

5.       four step vacuum exhaust to get good exhausting and dehumidifying effect

6.       if the natural moisture is less than 10% , the dryer is not needed

7.       it saves investment and energy

8.       the material and screw are made from special alloy, so the service life is longer than other equipment

9.       this is one step WPC technology, which saves energy

10.   the parallel twin screw extruder is of building block structure, so it can produce variety of plastic through adjusting the screw.

 

we have machine in stock

 

factory visiting welcome//